Marbri Supply Co. - Construction Supply

Adhesives • Coatings • Concrete Products
Demolition Agents • Epoxy Products • Fastening Systems
Expansion Joint Systems • Fabricated Steel • Fiber Wrap
Grouts • Sealants • Solvents • Waterproofing

100 Highland Drive
Suite 9
Medina, OH
44256-3160

330.721.0131
contact@marbri.net

	Home
	Contact Us

	Adhesives
	Coatings
	Concrete Repair
	Demolition Agents
	Epoxy Products
	Expansion Joint Systems
	Fastening Systems
	Fiber Wrap
	Grouts
	Miscellaneous
	Sealants
	Sealers
	Solvents
	Waterproofing

Grouts

Product Name		Maufacturer
	CONCRETE COAT CONCRETE COAT is a polymer modified cementitious mortar designed for use as a concrete repair mortar at thicknesses of 1/2	Euclid Chemical
	CONCRETE-TOP SUPREME CONCRETE-TOP SUPREME is a latex and microsilica modified cementitious mortar designed for use as a concrete repair mortar at thicknesses of 3/8"-2" (10 mm-50 mm).	Euclid Chemical
	Construction Grout Construction Grout is a noncatalyzed, multi-purpose construction grout containing mineral aggregate.	Master Builders Technologies
	DRY PACK GROUT DRY PACK GROUT is a natural aggregate, high strength, non-shrink material designed specifically for mixing and placing at a damp pack consistency.	Euclid Chemical
	E3-F E3-F high flow epoxy grout is the preformance standard for flowable epoxy grouts.	Euclid Chemical
	E3-HP E3-HP high performance epoxy grout is a performance standard for epoxy grouts. E3-HP is formulated from a new resin technology.	Euclid Chemical
	Emaco R300 CI Emaco R300 CI repair mortar is a one-component thixotropic polymer-modified cement-based profiling mortar with an integral corrosion inhibitor.	Master Builders Technologies
	Emaco R310 CI Emaco R310 CI repair mortar is a polymer-modified cement-based mortar with an integral corrosion inhibitor. It is used for patching or resurfacing distressed horizontal concrete surfaces.	Master Builders Technologies
	Emaco R320 CI Emaco R320 CI is a one-component polymer-modified fiber-reinforced repair mortar containing an integral corrosion inhibitor.	Master Builders Technologies
	Emaco R350 CI Emaco R350 CI is a one-component low-density, polymer-modified renovation mortar that contains an integral corrosion inhibitor. It is ideally suited for patching and resurfacing distressed concrete.	Master Builders Technologies
	Emaco S66 CI Emaco S66 CI is a rheoplastic, pourable, shrinkage-compensated repair concrete.	Master Builders Technologies
	Emaco S77 CI Emaco S77 CI is a rheoplastic, flowable, shrinkage-compensated, form-and-pump repair mortar designed for preplaced aggregate applications.	Master Builders Technologies
	Emaco S88 CI Emaco S88 CI repair mortar is a one-component rheoplastic, shrinkage-compensated, fiber-reinforced product that contains an integral corrosion inhibitor.	Master Builders Technologies
	Emaco T415 Emaco T415 repair mortar is one-component high-performance cementitious product.	Master Builders Technologies
	Emaco T430 Emaco T430 repair mortar is a one-component high-performance cementitious product.	Master Builders Technologies
	Embeco 636 Plus Grout Embeco 636 Plus Grout contains metallic and quartz aggregates and can be used at any consistency from fluid to damp pack.	Master Builders Technologies
	Embeco 885 Embeco 885 is a cement-based metallic-aggregate grout with an extended working time.	Master Builders Technologies
	EPOXY GROUT SYSTEM FOR EQUIPMENT BASES E3-G is a high strength epoxy grout designed for grouting of machine and equipment bases of all types.	Euclid Chemical
	EUCO #456 MORTAR EUCO #456 MORTAR is a trowel applied epoxy mortar system designed to surface and resurface floor slabs of all types.	Euclid Chemical
	EUCO #456S MORTAR EUCO #456S MORTAR is an epoxy repair material for use where exceptional strength and toughness are needed.	Euclid Chemical
	EUCO CABLE GROUT EUCO CABLE GROUT is designed to produce a pumpable, non-shrink, high strength grout. It provides corrosion protection for steel cable, anchorages and rods.	Euclid Chemical
	EUCO CABLE GROUT PTX EUCO CABLE GROUT PTX is designed to produce a pumpable, non-shrink, high strength grout. It provides corrosion protection for steel cables, anchorages and rods.	Euclid Chemical
	EUCO PRE-CAST GROUT EUCO PRE-CAST GROUT is designed for critical use where high strength, non-staining characteristics and positive expansion are required.	Euclid Chemical
	EUCO RAPID PATCH & RAPID PATCH VF EUCO RAPID PATCH is a rapid setting, rapid hardening cementitious material for patching and repair of concrete surfaces.	Euclid Chemical
	EUCO RAPID PATCH HE EUCO RAPID PATCH HE is a rapid setting, polymer modified cementitious material for precast, patching and repair of concrete surfaces, and areas requiring rapid set with rapid strength.	Euclid Chemical
	EUCO ROCK EUCO ROCK is a pourable, fast setting hydraulic cement designed for anchoring or grouting applications.	Euclid Chemical
	EUCO TREMIE GROUT EUCO TREMIE GROUT is specially designed for use in underwater grouting applications.	Euclid Chemical
	EUCO-SPEED EUCO-SPEED is a rapid setting, rapid hardening cementitious material for patching and repair of concrete surfaces.	Euclid Chemical
	EUCO-SPEED MP EUCO-SPEED MP is a rapid setting, very rapid hardening magnesium phosphate material for patching and repair of concrete and masonry surfaces.	Euclid Chemical
	EUCOCRETE EUCOCRETE is a versatile, one part, microsilica modified, patching and repair compound for repair projects of all types.	Euclid Chemical
	EUCOPATCH EUCOPATCH is a one part, fast setting, patching and repair material for use on new and existing concrete and masonry surfaces.	Euclid Chemical
	EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORT EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR is a trowel applied epoxy mortar system designed to resurface floor slabs of all types.	Euclid Chemical
	EUCOSHOT EUCOSHOT is a microsilica modified, one component, concrete repair material. This cement based, modified mortar is designed for use on vertical and overhead surfaces by dry shotcrete application.	Euclid Chemical
	FLEX-CON FLEX-CON is a water dispersion of an architectural grade acrylic latex specifically designed for modifying portland cement compositions.	Euclid Chemical
	HI-FLOW GROUT HI-FLOW GROUT is specially designed for use where high tolerance, high strength and high fluidity are required.	Euclid Chemical
	HI-FLOW METALLIC GROUT HI-FLOW METALLIC GROUT is specially designed for use where high tolerance, high strength and high fluidity are required.	Euclid Chemical
	MARK-183 : Low Mod Hi Impact Grout MARK 183 is a unique co-polymer formulation combining low modulus and high strength, designed for use with selected aggregates to form an unusually strong impact resisting grout which is capable of ac	Poly-Carb
	MARK-193 : CARBOPOXY GROUT MARK â€“ 193 CARBOPOXY is a three- component, solvent-less epoxy-based system. It is designed as a high strength, non-shrink grouting material.	Poly-Carb
	MARK-193LT : CARBOPOXY GROUT MARK â€“ 193 L.T. is a three-component, solvent-less epoxy-based system for specific use in temperature range of 10 F â€“ 35 F. It is designed as a high strength, non-shrink grouting materia	Poly-Carb
	MARK-194 : Non-Shink Grouting Gel MARK â€“ 194 Non-Shrink Grouting Gel (High Modulus) is a two component, solvent-less, high modulus, epoxy based system. It is designed as a high-strength, non-shrink grouting gel for structural r	Poly-Carb
	MARK-198 : Fast Setting Moisture Insensi MARK â€“198 is a two-component, solvent-less, moisture insensitive, epoxy-based system for use as a high-strength, non-shrink grouting material.	Poly-Carb
	MARK-198.1 : Fast Setting Moisture Insensitive Epoxy Grout MARKâ€“198.1 is a two-component, solvent-less, moisture insensitive, epoxy based system for use as a high-strength, non shrink grouting material.	Poly-Carb
	MARK-198.3 : Fast Setting Moisture Insensitive Epoxy Grout. MARKâ€“198.3 is a two-component, solvent-less, moisture insensitive, epoxy based system for use as a high-strength, non shrink grouting material.	Poly-Carb
	Masterflow 1205 Masterflow 1205 is a cement-based pumpable grout with specially graded aggregate.	Master Builders Technologies
	Masterflow 1341 Masterflow 1341 is specially formulated to produce a pumpable thixotropic grout.	Master Builders Technologies
	Masterflow 555 Masterflow 555 grout is a semi-fluid, nonshrink mineral-aggregate grout. It is ideally suited for grouting machines or plates requiring optimum load-bearing support.	Master Builders Technologies
	Masterflow 648 CP Masterflow 648 CP is a high-performance epoxy grouting material for support of heavy equipment.	Master Builders Technologies
	Masterflow 648 CP Plus Masterflow 648 CP Plus grout is three-component modified epoxy-resin-based grout with variable fill rates.	Master Builders Technologies
	Masterflow 668B Chock Grout Masterflow 668B Chock Grout is a three-component modified epoxy-resin-based grout.	Master Builders Technologies
	Masterflow 678 DP Plus Masterflow 678 DP Plus is a deep-pour, low-exotherm, multi-use three-component epoxy grout.	Master Builders Technologies
	Masterflow 713 Plus Masterflow 713 Plus is a cement-based grout with specially graded mineral aggregates.	Master Builders Technologies
	Masterflow 816 Masterflow 816 cable grout is a hydraulic, cement-based aggregate-free grout.	Master Builders Technologies
	Masterflow 928 Masterflow 928 grout is a hydraulic cement-based mineral-aggregate grout with an extended working time. It is ideally suited for grouting machines or plates requiring precision load-bearing support.	Master Builders Technologies
	Masterflow MP Masterflow MP grout is a three-component epoxy grout.	Master Builders Technologies
	NS GROUT NS GROUT is designed for critical use where high strength, non-staining characteristics and positive expansion are required. It contains only natural aggregate and an expansive cementitious binder.	Poly-Carb
	NS METALLIC GROUT NS METALLIC GROUT is a factory-blended, non-shrink grout for use in critical applications. It incorporates the latest technological advances in shrinkage prevention and internal reinforcement.	Euclid Chemical
	POLY-PATCH POLY-PATCH is a normal setting cement based patching and resurfacing compound ready to use with the addition of only water.	Euclid Chemical
	SBR LATEX SBR LATEX is a carboxylated styrene butadiene copolymer latex admixture that is designed as an integral adhesive for cement bond coats, mortars and concrete to improve bond strength.	Euclid Chemical
	Set 45 and Set 45 HW Set 45 is a one-component magnesium phosphate-based patching and repair mortar.	Master Builders Technologies
	Set Grout Set Grout is a Portland-cement-based construction grout containing mineral aggregate.	Master Builders Technologies
	Shotpatch 21 Shotpatch 21 is prepackaged, silica-fume-enhanced mortar containing an integral corrosion inhibitor. It exhibits high bond strengths, low permeability, and excellent resistance to freeze/thaw cycling.	Master Builders Technologies
	Shotpatch 21F Shotpatch 21F is a one-component prepackaged, fiber-reinforced repair mortar that contains an integral corrosion inhibitor.	Master Builders Technologies
	THIN COAT THIN COAT is a latex modified cementitious product designed for use as a concrete repair mortar at thicknesses of up to 1/2" (13 mm).	Euclid Chemical
	THIN-TOP SUPREME THIN-TOP SUPREME is a latex and microsilica modified cementitious mortar designed for use as a floor or deck topping at thicknesses of 1/16" to 3/8" (1.6 mm to 10 mm).	Euclid Chemical
	VERTICOAT VERTICOAT is a polymer modified cementitious mortar for vertical and overhead concrete and masonry repairs. It sets rapidly to allow quick, easy repairs of concrete surfaces both inside and outside.	Euclid Chemical
	VERTICOAT SUPREME VERTICOAT SUPREME is a one component, microsilica and latex modified, non-sag repair mortar.	Euclid Chemical

100 Highland Drive Suite 9 Medina, OH 44256-3160
330.721.0131